Product3 - Bulk Cloned-manufacture,factory,supplier from China

   Particle board is also referred to as chipboard or flakeboard, it's a form of wood-primarily based panel made of timber or different lignocellulosic materials and stuck under warmth and strain after applying adhesive.

Moistureproof board is to add a certain proportion of moistureproof particles in the production process of the base material, also known as melamine board (base material), which can greatly reduce the degree of expansion of the board when encountering water.  Gaotang County Xinhua Wood Industry Co., Ltd. was established in April 2010 with a registered capital of 11 million yuan. It covers an area of about 76,600 square meters, including a construction area of about 22,000 square meters.

      Density board is called density fiberboard. It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.     According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard.

    Particleboard, also known as chipboard, flakeboard, is a wood-based panel that is made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive. It is mainly used in furniture manufacturing and construction industry as well as train and car carriage manufacturing.Method for judging the quality of particleboard wardrobes1. From the appearance point of view, look at the size and shape of the sawdust particles in the center of the cross section. The length is generally 5-10MM.

     Our most vital products include: Particle board, OSB, MDF, HDF,Finished MDF, with many superior imported equipments and manufacturing traces, truly offering capability not less than 30,000 cubic meters monthly.     All production properly adapt to The United States, India, Middle-east, South Asia, Europe, Middle & South America, many nations and areas, well used and in shape for furnishings, decorations and production industries.     We constantly insist on "High-quality first, Service-first" making standard products and comu

    Medium density fiberboard is a kind of artificial board made from the thinned wood of branches, small diameter wood, fast-growing wood, bamboo and other plant materials with limited wood resources. The comprehensive utilization rate of wood is high, which conforms to China's forestry development policy and is conducive to the implementation of China's forestry sustainable development strategy.Medium density fiberboard DisplayProduct Certificates-SGS,ISO9001,FSC  

     Particleboard, also known as chipboard, is a wood-based panel that is made of wood or other lignocellulosic materials and glued under heat and pressure after applying an adhesive.

Medium density fiberboard is a kind of man-made board made of wood or plant fiber through mechanical separation and chemical treatment, mixed with adhesive and waterproof agent, and then formed by high temperature and high pressure.

Medium density fiberboard    MDF has good physical and mechanical properties and processing properties, and can be made into plates of different thicknesses. Therefore, it is widely used in furniture manufacturing, construction and interior decoration industries.    Medium density fiberboard is a homogeneous porous material with good acoustic performance. It is a good material for making speakers, TV shells and musical instruments.   In addition, it can also be used for ships, vehicles, sports equipment, floors, wallboards, diaphragms, etc.

Particleboard Quality Judgment1. From the appearance point of view, look at the size and shape of the wood chips in the center of the cross-section. The length is generally 5-10MM in length. If the length is too long, the structure is loose, and if it is too short, the deformation resistance is poor, and the so-called static bending strength does not meet the standard;2. The moisture resistance of wood-based panels depends on its density and moisture-proof agent.

An Introduction to OSB Board      OSB is Oriented Strand Board ,the upgrading of traditional particle board.

Oriented strand board is a new type of high-strength environmental protection board. Under the background of the prominent structural contradiction between the supply and demand of wood in my country and the prevalence of green environmental protection concepts, oriented strand board relies on a wide range of material sources, advanced production technology, and excellent mechanical properties.

What is OSB ?Oriented Strand Board (OSB) is a kind of fresh wood with large diameter and straight trunk as raw material. It is processed along the direction of wood grain by special slicing processing equipment.

    Oriented strand board (OSB), also known as Ozon board, originated in the 1970s and developed from structural particle board-waffle board. Since the mid-1980s, it has developed rapidly in North America and Europe, and has begun to replace plywood in large quantities. For use with fiberboard.    Oriented strand board is a new type of high-strength environmental protection board.

What is OSB Board?       Oriented strand board (OSB) is a type of engineered wood similar to particle board, formed by adding adhesives and then compressing layers of real wood strands (flakes) in specific orientations.

    OSB board is the upgrading of traditional particle board.

The raw materials for making particleboard include wood or wood fiber materials, adhesives and additives. The former accounts for more than 90% of the dry weight of the board. The wood raw materials are mostly taken from felled wood in the forest area, small diameter wood (usually less than 8 cm in diameter), felling residues and wood processing residues. Wood chips, shavings, wood filaments, sawdust, etc. processed into flakes, strips, needles and granules are called chips.

   The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000. After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.    After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

The production of chipboard in China has gone through a repeated process from the rise in the 1980s to the decline in the 1990s and then to the rise again in 2000.    After the particle board was abandoned by the market due to poor quality and other reasons, many particle board enterprises learned a lesson, introduced advanced production lines from abroad and improved the technology level.   After that, the quality of particle board in China has improved significantly, and it has been accepted by the market again.

Advantages of MDFThe surface is smooth and flat, the edges are firm, the surface decoration is good, and it is easy to finish and process. All kinds of paints and paints can be evenly slaughtered on MDF boards. Various veneers, adhesive tape films, light metal sheets, and melamine boards can be pasted on the surface. , good physical properties, no dehydration problem.

     Density board is called medium density fiberboard（MDF) . It is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure. According to its density, it can be divided into high-density fiberboard, medium-density fiberboard and low-density fiberboard. It is widely used in the fields of furniture manufacturing and decoration in China.Xinhua Wood Show  Xinhua Wood Machinery  Gaotang County Xinhua Wood Industry Co., Ltd.

Variety of Wood Panel1. Low density fiberboard It is a panel made of wood or plant fiber shavings that are applied with a large amount of urea-formaldehyde glue and auxiliary materials. Its density is lower than 450 kg/m3, the fiber particles are larger, the internal structure is not uniform, the strength is relatively insufficient, and the weight is light.2. Medium density fiberboardIt is a board made of wood fiber or other plant fiber, added with urea-formaldehyde adhesive, and pressed under high temperature and high pressure.

  Density board is made of wood fiber or other plant fiber, prepared by fiber, applied with synthetic resin, and pressed under heat and pressure.Certificates ISO FSC SGS  

1. Physical and mechanical propertiesBecause the fiber structure of the board is uniform and the bonding strength between fibers is high, its static bending strength, plane tensile strength and elastic modulus are good. However, because MDF is made of logs that are ground into fibers, which completely changes the structure of the wood, it has higher moisture absorption, water absorption performance, and higher thickness expansion rate, and its nail holding power is worse than that of particleboard.2.